Contact Us

Tel:+86-571-63702298

Fax:+86-571-63704882

Mob:+8613738019896

E-mail: econxu@zhengchida.com

Lemon Lian

Tel: 18768461415

E-mail: lemon.lian@zhengchida.com

Add:No.188 ,Xinxi Road, Jincheng Street, Lin'an City, Zhejiang P.R.C City:  Lin'an Hangzhou

Home > News > Content
What Should I Pay Attention To When Using The Brush Cutter Blade? Nov 24, 2018

The brush cutter is a two-stroke power. It should be paid attention to from the three aspects of power, use and tool to ensure the normal use of the machine: 1. Engine: A, qualified gasoline and engine oil to ensure the mixing ratio (25:1) B, regular (25 hours) check the replacement of the air filter to check the spark plug; C, after working a tank of oil, should rest for 10 minutes, after each work, clean the machine's loose gasket to ensure heat dissipation; D, when stored, must be cleaned The body, let go of the mixed fuel, burn the fuel in the carburetor; remove the spark plug, add 1-2ml of two-stroke engine oil to the cylinder, pull the starter 2-3 times, and install the spark plug. 2. Transmission: Regularly (25 hours) replenish the gearbox with grease, and add grease to the joint of the upper part of the drive shaft and the clutch disc. 3, brush cutter blade: nylon cable head should control its length <= 15cm, when using the blade, should ensure the balance of the blade, do not use the blade with vibration.